With this Pro-Lab Asbestos Test Kit, you can move a long way towards detecting the unseen hazards that could be hiding in your house. Not so long ago, it was widely known for its fireproof and insulating properties, but now it has been found to also cause lung cancer in workers who were exposed to it.

If you’re not certain whether or not it’s in your property, but you suspect there might be a small chance, you might want to invest in this easy and safe testing method. This test kit comes with an integrated moisture meter, airflow meter, and ultraviolet (UV) test. With these instruments, you can determine quickly whether or not you have any asbestos in your wall, floor, or ceiling insulation.

The majority of buildings built before the ’80s did not require asbestos testing. That was because the materials were typically made of fiberglass, which was deemed “fireproof”. Fiberglass buildings do not require asbestos testing because fibers do not cling to the materials they are attached to.

However, buildings constructed in the last decade and especially before containing small amounts of asbestos, which can migrate into the air and become trapped within a home or building. In instances where asbestos testing is required, a trained certified contractor will perform the test. They will assess the situation and advise you if the building would require asbestos testing.

If it does, then you would receive a sample. Usually, contractors send the samples through the mail. You will need to provide a few samples for testing. The cost of the samples is more than affordable, so many homeowners don’t even bother. However, if you want a better deal on the samples, then you should shop around. There are some less expensive places to purchase the samples from.

One option is to use an asbestos investigator. An asbestos investigator will test for the material on your property with a special type of device. The device will contain a sensor that can detect the presence of the mineral. If the sample is positive, then the investigator will contact you and give you a price quote on how much the sample will cost to remove. The price quote is usually less expensive than having the asbestos testing done.

However, if the sample isn’t positive, then the cost is usually lower. Unfortunately, if you have asbestos testing done on your house while the renovation is being performed, then you could end up paying for the entire project. If the sample shows that there is Asbestos in your house, then you must move quickly. Moving forward with the renovation is only going to cost you more money in the long run. You can save yourself the trouble, by simply hiring an asbestos investigator to come in before demolition. They are much better equipped to identify the material, as opposed to just guessing.

While many older buildings still require asbestos testing, this is becoming rarer. Nowadays most buildings constructed use materials that do not contain Asbestos. This makes it a bit harder to remove the material if it were to be found in your house. Therefore, if any houses are being demolished, it would be wise to have the asbestos testing done.